| Detection method | Through beam |
|---|---|
| Detecting distance | 30m |
| Detection object | Opaque object of dia.20 min. |
| Power supply | AC/DC24-240V ±10% 50/60Hz |
| Power consumption | Transmitter: 1.8 W or less Receiver: 2 W or less |
| Output mode | Relay output 1c / Rating: 1 A (250 VAC max. resistance load 30 VDC max. resistance load) (*2) (*3) |
| Operation mode | Light ON |
| Response time | 5ms or less |
| Operating angle | 5% (at receiver) |
| Light source (wavelength) | Infrared LED (880 nm) |
| Indicator | (Transmitter) Power indicator (red LED) (Receiver) Operation indicator (red LED) / Stability indicator (green LED) |
| Material | Lens: acrylic / Case: heat resistant ABS |
| Connection (*3) | Attached cable (Outer dimension: dia.6mm) Transmitter: 0.3 mm2 x 2 cores, 2 m, gray Receiver: 0.3 mm2 x 5 cores, 2 m, black |
| Weight | Transmitter: Approx.150 g / Receiver: Approx.150 g |
| Notes | (*1) When used with K-7 reflector provided (*2) Sensors with high-speed, long-life photo-MOS relay (1a) are available on request (Contact Takex for details). (*3) The cable length including connector for attached cable type (-J type) is 300 mm. Optional cable with connector is available. The output of a sensor with attached cable with connector (-J type) is 1a. Sensors of this series are not provided |
| Ambient light | 10,000 lx or less |
|---|---|
| Ambient temperature | -25 - +55 ℃ (non-freezing) |
| Ambient humidity | 35-85%RH (non-condensing) |
| Protective structure | IP66 |
| Vibration | 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions |
| Shock | 500 m/s2 / 3 times each in 3 directions |
| Dielectric withstanding | 1,500 VAC for 1 minute |
| Insulation resistance | 500 VDC, 100 MΩor higher |