Rating/Performance/Specification

Detection method	Diffuse reflective
Detecting distance	1m
Detection object	Opaque, translucent
Power supply	AC/DC24-240V ±10% 50/60Hz
Power consumption	2 W or less
Output mode	Relay output 1c / Rating: 1 A (250 VAC max. resistance load 30 VDC max. resistance load) (*2) (*3)
Operation mode	Light ON
Response time	5ms or less
Hysterisis	10% or less
Light source (wavelength)	Infrared LED (880 nm)
Indicator	Operation indicator (red LED) Stability indicator (green LED)
Volume (VR)	Sensitivity adjustment provided
Material	Lens: acrylic / Case: heat resistant ABS
Connection (*3)	Attached cable (Outer dimension: dia.6mm) 0.3 mm2 x 5 cores, 2 m, black
Weight	Approx.150g
Notes	(*1) When used with K-7 reflector provided (*2) Sensors with high-speed, long-life photo-MOS relay (1a) are available on request (Contact Takex for details). (*3) The cable length including connector for attached cable type (-J type) is 300 mm. Optional cable with connector is available. The output of a sensor with attached cable with connector (-J type) is 1a. Sensors of this series are not provided

(*1) When used with K-7 reflector provided (*2) Sensors with high-speed, long-life photo-MOS relay (1a) are available on request (Contact Takex for details). (*3) The cable length including connector for attached cable type (-J type) is 300 mm. Optional cable with connector is available. The output of a sensor with attached cable with connector (-J type) is 1a. Sensors of this series are not provided with mounting brackets. Brackets for vertical or back-to-back mounting are optionally available

Environmental Specification

Ambient light	10,000 lx or less
Ambient temperature	-25 - +55 ℃ (non-freezing)
Ambient humidity	35-85%RH (non-condensing)
Protective structure	IP66
Vibration	10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions
Shock	500 m/s2 / 3 times each in 3 directions
Dielectric withstanding	1,500 VAC for 1 minute
Insulation resistance	500 VDC, 100 MΩor higher