| Detection method | Through beam |
|---|---|
| Detecting distance | 20m or less |
| Detection object | Opaque object of dia. 22 mm min |
| Power supply | 24-240VAC/DC ±10% 50/60Hz |
| Power consumption | Transmitter : 1.5W or less Receiver : 2 W or less |
| Output mode | Relay output 1a / Ratin : 3 A 250 VAC or less 30 VDC or less : resistive load |
| Operation mode | Light ON/Dark ON selectable. |
| Response time | 10ms or less |
| Operating angle | 3°(at receiver) |
| Light source (wavelength) | Red LED (700 nm) |
| Indicator | Transmitter : - Receiver : Operation indicator (orange LED) |
| Switch (SW) | Light ON/Dark ON selector switch |
| Material | Lens: acrylic / Case: heat resistant ABS / Cover: acrylic |
| Connection | Terminal block (Screw: M3.5) |
| Weight | Transmitter : Approx. Approx. 150g Receiver : Approx. 170g |
| Accessory | Operation manual, Mounting bracket |
| Notes | The detecting distance and detection object of retroreflective types varies, depending on reflector types combined with the sensor. The detecting distance is the range which you can set for the reflector. The sensor can detect an object even in extremely short range. |
| Ambient light | 10,000 lx or less |
|---|---|
| Ambient temperature | -25 - +55 ℃ (non-freezing) |
| Ambient humidity | 35-85%RH (non-condensing) |
| Protective structure | IP66 |
| Vibration | 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions |
| Shock | 100 m/s2 / 3 times each in 3 directions |
| Dielectric withstanding | 1,500 VAC for 1 minute |
| Insulation resistance | 500 VDC, 100 MΩ or higher |