JRM3RF

Rating/Performance/Specification

Detection method Polarized retroreflective
Detecting distance 0.03-3m
(with K-7 reflector)
Detection object Mirror-like opaque
Power supply 24-240V AC/DC ±10% 50/60Hz
Power consumption 2 W or less
Output mode Relay output 1a / Rating: 2 A (250 VAC) or less resistance load
Operation mode * Light ON/Dark ON selectable
* Timer function selectable
Selectable between on delay, off delay, one shot and timer
disabled (with switch)
Delay time: 0.1-1 s, 1-10 s
Response time 5ms or less (*)
Operating angle 30° (at reflector)
Light source (wavelength) Red LED
Indicator Transmitter P.L: power indicator (red LED)
Receiver OP.L: operation indicator (red LED)
STB: stability indicator (green LED)
Volume (VR) Delay time adjustment
(at receiver)
Switch (SW) FUNCTION.SW provided (selects between functions)
OND.: on delay △: Light ON ▲: Dark ON
OFD.: off delay △: Light ON ▲: Dark ON
OST.: one shot △: Light ON ▲: Dark ON
NORM: timer disabled △: Light ON ▲: Dark ON
(With rotary switch: integrated on bottom of sensor unit)
Delay time range selector switch provided
0.1-1 s: variable between 0.1 and 1 second with TIME VR
1-10 s: variable between 1 and 10 sec
Material Case : Acrylic
Connection Terminal block (with M3.5 screws)
Weight Approx. 250g
Notes (*) While the response time is fast, use at a switching frequency of 30/min or less is recommended for the life of the relay.
Accessory Operation manual, Mounting bracket, reflector model K-7

(*) While the response time is fast, use at a switching frequency of 30/min or less is recommended for the life of the relay.

Environmental Specification

Ambient light 10,000 lx or less
Ambient temperature -25 - +55 ℃ (non-freezing)
Ambient humidity 35-85%RH (non-condensing)
Protective structure IP66
Vibration 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions
Dielectric withstanding 1,500 VAC for 1 minute
Insulation resistance 500 VDC, 100 MΩ or higher