| Installation Height(from floor) | 1m to 3m (For asphalt floor, 1 to 2.6m) |
|---|---|
| Detection Heigh(from floor) | Presence mode: Approx. 0.4m or more |
| Detection object | Dia. 0.3m white drawing paper |
| Power supply | 12 - 24VDC ±10% / Ripple 10% or less |
| Power consumption | 1.7W or less |
| Output mode | Relay output 1c / Rating: 0.5A( Resistive load 30 V DC or less) |
| Operation mode | Presence mode/Motion detective mode selectable |
| Timer feature | Timer function selectable Selectable between on-delay, off-delay, Delay time: 3s / 9s |
| Response time | Motion detection mode: 0.2s or less(Short selected) DELAY switch selectable |
| Anti Interference | MASTER / SLAVE (Max. 8 units including the master unit) |
| Light source (wavelength) | Infrared LED(850nm) |
| Indicator | Operation / Teach indicator (yellow green LED) Error / Slave indicator (orange LED) Zone indicator (yellow LED) |
| Switch | SET switch (Power ON reset teaching ON/OFF switch) Delay switch (timer selective) Zone switch (zone selective) |
| Teaching method | Teaching with a remote controller(Remote controller is optional) Power ON reset teaching |
| Teaching type | One point zone teaching |
| Material | Base: ABS Chassis: ABS Cover: PMMA |
| Connection | M3 self-up terminal block |
| Weight | Approx. 200g |
| Accessory | Mounting screws, washers, dust prevention sheet、operation manual |
| Ambient light | 5000 lx or less |
|---|---|
| Ambient temperature | -20 - +55 ℃ (storage: -40 - +70 ℃) ( non-freezing) |
| Ambient humidity | 35~85%RH (non-condensing) |
| Protective structure | IP40 |
| Vibration | 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction |
| Shock | 500 m/s2 / 3 times each in 3 directions |
| Dielectric withstanding | Between total of terminals and case: 1000 VAC for 1 minute Between relay output and power supply or internal circuit: 500 VAC for 1 minute |
| Insulation resistance | 500 VDC 20 MΩ or higher |