Detection method | Through beam |
---|---|
Detecting distance | 2m |
Detection object | Opaque dia.35mm or more |
Number of beams | 16 |
Detecting width | 375mm |
Beam interval | 25mm |
Power supply | 12-24VDC ±10% / Ripple 10% or less |
Current consumption | 155mA or less |
Output mode | Control output : Selectable between NPN output and PNP output with switch Rating : Sink current 50mA (30VDC) or less / Residual voltage: 2V or less |
Operation mode | Light ON/Dark ON selectable (with switch) |
Frequency switching feature | Provided (for up to 2 units) |
Response time | Normal: Light reception: 94 ms or less Light blocking: 58 ms or less With frequency switching feature enabled: Light reception: 116 ms or less Light blocking: 72 ms or less |
Job light input | Contact or non-contact input |
Light source | Infrared LED (wavelength : 880nm) |
Indicator | Transmitter: Power indicator (green LED) / Job indicator (green) Receiver :Received light intensity indicator (green / orange LED) / Light blocking indicator (orange LED) Job indicator (green) / Fault indicator (red LED) |
Job indicator Fault indicator |
Continuous/flashing illumination selectable with the switch Flashing speed: FAST/SLOW selectable with the switch |
Output short circuit protection | Provided |
Automatic sensitivity compensation | Provided |
Material | Case : Aluminum / caps at ends (mounting legs): PBT with glass fiber lens: Polycarbonate / switch cover: Polyester elastomer |
Connection | Cable with M12 4 pin connector pigtail, 0.3m transmitter: gray / receiver: black |
Weight | Transmitter: approx. 200g Receiver: approx. 215g |
Accessory | Screwdriver for switch operation mounting bracket is not separately available. |
Ambient light | 10,000lx or less |
---|---|
Ambient temperature | -10 - +55 ℃ (non-freezing) |
Ambient humidity | 35-85%RH (non-condensing) |
Vibration | 10 - 55Hz / 1.5mm double amplitude / 2 hours each in 3 directions |
Shock | 500m/s2 / 2 times each in 3 directions |
Protective structure | IP62 |
Dielectric withstanding | 1,000VAC 50/60Hz for 1 minute |
Insulation resistance | 500VDC, 20MΩ or higher. |