Power supply | 24VDC±10% |
---|---|
Current consumption | 40mA or less |
A/D conversion method | Sequential comparison system 10bit (1024) |
Measurement range (input mode) | 0 to 5 VDC/0 to 10 VDC /0 to 20mA (selectable) |
Display resolution | 0 to 5VDC :0.01V/0 to 10 VDC :0.01V / 0 to 20mA : 0.1mA |
Output mode | NPN open collector output, Rating: 50mA (30VDC) or less, 4 output |
Sensor power supply | 24VDC (200mA or less) ※1 |
Indication method | 3 digits, 0 to 5V : 0.00 to 5.50/0 to 10V : 0.00 to 11.0/0 to 20mA : 0.00 to 22.0 |
Indication size | 7 segments, Red×1, Green×3, Font size: 8×4mm |
Sampling speed | 2000 times/sec |
Avaraging | 1 to 200 counts (selectable) |
Output delay | On delay/Off delay (1 to 999msec, selectable) |
Operation mode | HI ON (Hon) / LO ON (Lon) (selectable) |
Connection | Terminal block, Tightening torque: 0.3N・m or less |
Material | Case: PPE Panel: PET |
Mounting method | DIN rail (35mm) and screw tightening method |
Weight | Approx. 130g |
Accessories | Instruction manual |
※1 Power supply directly connected
Ambient temperature | -10 to +55℃ (non-freezing) |
---|---|
Ambient humidity | 35 to 85%RH (non-condensing) |
Vibration | When mounting directly, When mounting to DIN : 10 to 55Hz when tested with double amplitude of 0.75mm in X, Y, and Z directions, 2 hours for each direction ※2 |
Shock | When mounting directly : 500m/s2 when tested in X, Y, and Z directions, 3 times for each direction When mounting to DIN : 300m/s2 when tested in X, Y, and Z directions, 3 times for each direction |
Dielectric tolerance | 1000VAC for 1 minute between whole live part and case |
Insulation resistance | 20MΩ or more when tested with 500VDC megger |
※2 When mounting to the DIN rail, attach the stopper (end unit) to the product.
End unit (option) model : FA7EU