Rating/Performance/Specification

Detecting distance	0.4 - 6m
Detection object	500x500mm (2mm thick aluminum plate)
Power supply	12 - 24VDC ±10% / Ripple (p-p) 10% or less.
Power consumption	1.3W or less (current consumption: Approx.110mA or less (DC12V), Approx. 55mA (DC24V))
Response speed (standalone use)	600ms or less
Output mode	Analog: 4-20mA current output(applicable load:0-250Ω) for voltage output see *3
Minimum resolution *1	5.6mm (0.1%F.S.)
Linearity	± 1% F.S.
Temperature characteristics	± 1% of F.S. or less. with reference to output at 23 C between -10 and +55 C (±0.03% of F.S./ C or less)
Ultrasonic frequency	Approx. 40kHz
Indicator	RUN: (green) 4mA: (red) mid (orange) 20mA (green)
Teaching system	Teaching: distance setting, output inversion (with SET button)
Connection	Connector (M12) *2
Weight	Approx. 200 g
Protective feature	Output short circuit protection, power supply output protection against reverse connection
Auxiliary function	Anti interference, temperature correction
Material	Case: Brass (nickel plated) Detection Side: ABS, urethane, Aluminum
Accessories	Operation manual, voltage conversion resistance (250Ω),wave washers, nuts (Note :Cord with connector separately available)

*1 Value applicable about 15 minutes after power-up. Output may be slightly fluctuated by external disturbance, etc. *2 Cable with M12 connector is separately available. *3 May be converted into voltage output (1-5 V) with the resistor (250 ﾎｩ) provided.

Environmental Specification

Ambient temperature	-10 - +55 ℃ (strage：-20 - +65 ℃) (non-freezing)
Ambient humidity	35 - 85%RH (non-condensing)
Ambient wind speed	1 m/s or less
Protective structure	IP67 (no drops of water allowed on head)
Vibration	10 - 55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions
Shock	500 m/s2 / 3 times each in 3 directions (ultrasonic element excluded)
Dielectric withstanding	1000VAC 50/60Hz for 1 minute
Insulation resistance	500 VDC, 50 MΩ or higher