Detection method Ultrasonic through
Power supply 12 - 24V DC ±10% / Ripple 10% or less
Current consumption 60 mA or less
Detection distance 30 mm fixed
Output voltage range ±4mm of center
Output mode Analog output (1V to 5V within output voltage range, otherwise 6V or less)
allowable load resistance:10kΩ or more *1
Response time 100 ms or less
Ultrasonic frequency 40kHz
Indicator Output level indicator: five steps depending on the output voltage (green LED)
Case Material Case: ABS, Detection side: Aluminum
Connection Attached cord (φ4mm) 0.2 mm2 × 3 cores, 2 m
Protection feature Protection against reverse connection
Weight Approx. 150g
Accessory Operation manual

*1 When the temperature is 25°C and the detection object is stainless steel plate (thickness 0.2mm)

Environmental Specification

Ambient temperature 0 - +50°C/Storage: -30 - +70°C (non-freezing)
Ambient humidity 35 - 85% RH (non-condensing)
Protective structure IP54 (no drops of water allowed on head)
Vibration 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction
Shock 500 m/s2 / 3 times each in 3 directions
Dielectric withstanding 1000 VAC 50/60Hz for 1 minute
Insulation resistance 500 VDC, 50MΩ or higher