| Detection method | Through |
|---|---|
| Detecting distance | 500mm or less |
| Detection object | 10 x 30mm |
| Power supply | 24V DC ±10% / Ripple 10% or less |
| Current consumption | Transmitter:25mA or less / Receiver:15mA or less |
| Response time | 10ms or less |
| Output mode | Rating: Source current 100 mA (30 VDC) or less |
| Operation mode | Detect ON |
| Operating angle | 20°(receiver) |
| Ultrasonic frequency | 380kHz ±10kHz |
| Indicator | Operation indicator (red LED) / Stability indicator (green LED) |
| Volume | Sensitivity adjustment |
| Material | Case/nut : Heat resistant ABS resin Detection side :glass epoxy conductive EPDM |
| Connection | Attached cord(dia.4mm) Transmitter: 0.2 mm2 x 2 cores, 2 m Receiver: 0.2 mm2 x 3 cores, 2 m |
| Weight | 80 g or less (transmitter/receiver) |
| Accessory | Operation manual, mounting bracket,screw for adjustment |
*Sample object: 1-mm thick aluminum plate
| Ambient temperature | -10 - +55 ℃ (non-freezing) |
|---|---|
| Ambient humidity | 35-85%RH (non-condensing) |
| Ambient wind speed | 1m/s max. |
| Protective structure | IP54 (no drops of water allowed on head) |
| Vibration | 10 - 55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions |
| Shock | 500 m/s2 / 3 times each in 3 directions (ultrasonic element excluded) |