US-1AHPN

Rating/Performance/Specification

Detection method Reflective
Detecting distance 80-1000 ±10mmWith 40x 40mmaluminum plate
Power supply 12-24V DC ±10% / Ripple 10% or less
Current consumption 50mA or less
Output mode Analog Analog output:
0.6 -10V
Output impedance: 600 Ω
Comparator output:
PNP open collector
Source current 100
mA (30 VDC) or less
Operation mode Detect ON/Detect OFF selectable (with switch)
Minimum resolution 1mm=10mV
Linearity ±3% FS (full scale)
Response time Analog output: 10V→2V 60ms
2V→10V 50ms
Comparator output: Analog response time + 10 ms
Hysteresis 3% or less. of detecting distance
Ultrasonic frequency 186kHz±10kHz
Indicator Operation indictor: Red LED (each on front/back)
Reception indicator: Green LED (front)
Volume Distance adjustment (4-turn without stopper) provided
Switch (SW) Detect ON/Detect OFF selector switch
Protective feature Output short circuit protection, protection against reverse connection
Material Case: aluminum / Lid: polycarbonate
Front panel: acrylic / Back panel: ABS
Connection Attached cable (dia.6.5mm)
0.3 mm2 4 cores, 2 m
Weight 350 g or less
Accessory Operation manual

Environmental Specification

Ambient temperature -10 - +55 ℃ (non-freezing)
Ambient humidity 35-85%RH (non-condensing)
Ambient wind speed 1m/s or less
Protective structure IP51
Vibration 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions
Shock 500 m/s2 / 2 times each in 3 directions (ultrasonic element excluded)
Dielectric withstanding 500VAC for 1 minute
Insulation resistance 500 VDC, 20 MΩ or higher