| Detection method | Through beam |
|---|---|
| Detecting distance | 2m |
| Detection object | Liquid or opaque object |
| Power supply | 12-24 VDC ±10%, ripple 10% or less |
| Current consumption | Transmitter: 25 mA or less; Receiver: 10 mA or less |
| Output mode | NPN open collector / Rating: sink current 100 mA (30 VDC) or less |
| Operation mode | Light ON/Dark ON selectable (with switch) |
| Response time | 1ms or less |
| Operating angle | 15° (at receiver) |
| Light source (light wavelength) | Infrared LED (1450nm) |
| Indicator | Transmitter: power indicator (red LED) / Receiver: light reception indicator (red LED) / stability indicator (green LED) |
| Volume (VR) | Sensitivity adjustment |
| Switch (SW) | Light ON/Dark ON selector switch |
| Short circuit protection | Provided |
| Material | Case/lens: polycarbonate |
| Connection | Attached cable (Outer dimension: 4.2mm) / Transmitter: 0.3 mm2 x 2cores 3m, gray / Receiver: 0.3 mm2 ×3cores 3m, black |
| Weight | Approx. 100 g (transmitter/receiver) |
| Accessory | Mounting bracket, 2 pinhole sheets |
| Ambient temperature | -25 - +55 ℃ (non-freezing) |
|---|---|
| Ambient humidity | 35-85%RH (non-condensing) |
| Protective structure | IP67 |
| Vibration | 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions |
| Shock | 500 m/s2 / 3 times each in 3 directions |
| Dielectric withstanding | 1,000 VAC for 1 minute |
| Insulation resistance | 500 VDC, 20 MΩ or higher |