FD600A

Output specification

Output mode Mini power relay output
Control output ON-OFF control (Light ON)
Rating:
1c
250VAC 5A or less
(Resistive load)
Response time:
15ms or less
SAFETY ALARM output Raing: Relay output 1a
Rating: 250VAC 5A or less (Resistive load)

General specification

Valid lens diameter dia.28mm (OHA, OHAN, OHAN10)
Power Supply 100 - 220VAC+10%, -15% 50/60Hz
Power consumption 10W or less
Connection Cable with connector (CVV 1.25mm2, length 2m)
Ambient temperature Optical head, Fiber optic cable: -25 ℃ to 200 ℃
Amplifier: -25 ℃ to 50 ℃ (Non-freezing)
Storage temperature range -40 ℃ to 70 ℃ (Non-condensing)
Ambient humidity 35 to 85%RH or less (Non-condensing)
Fiber optic cable allowable bending radius 50mm
Insulation resistance Between power supply and case: 500VDC, 20 MΩ or higher
Between output and case: 500VDC, 20 MΩ or higher
Between power supply and output: 500VDC, 20 MΩ or higher
Operation check input: Omitted
Dielectric withstanding Between power supply and case: 1500VAC for 1 minute
Between output and case: 1500VAC for 1 minute
Between signal relay outputs: 1000VAC for 1 minute
Between power supply and output: 1500VAC for 1 minute
Between signal relay outputs: 1000VAC for 1 minute
Operation check input: Omitted
Vibration 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction
Shock 500 m/s2 / 3 times each in 3 directions
Protective structure IP66
Weight Optical head:
Basic type (OHA): Approx. 680g
Wide type (W1/W2): Approx. 1300g
Narrow type (OHAN): Approx. 840g
Narrow type (OHAN10): Approx. 860g
Airless hood:
F38A : Approx. 240g F38A-02 : Approx. 330g
F38A-03 : Approx. 430g F38A-04 : Approx. 550g
F38A-05 : Approx. 650g F38W : Approx. 600g
Air purge hood:
F38PC-02 : Approx. 240g F38PC-03 : Approx. 300g
F38PC-04 : Approx. 370g F38PC-05 : Approx.

Amplifier Major Specification