| Temperature of detected object | 560 ℃ or higher |
|---|---|
| Output mode | Relay output/voltage output Rating: Relay output: 1c 250 VAC 5 A or less (resistive load) Voltage output 12 VDC 5 mA or less |
| Operation mode | Light ON (activated for presence of material) Timer operation selectable, external gating Timer: On delay, off delay, one shot, timer disabled (ON/OFF) Time: Selectable between 0.1-1s and 1-10s (with switch) |
| Response time | Relay output: 25ms; voltage output: 3ms |
| Power supply | 100/110VAC･200/220VAC±10%, 50/60Hz |
| Power consumption | 5VA or less |
| Connection | Amplifier: Terminal block(3.5mm screws) Sensor: Shielded cable 0.3mm2 x 1 core, length 2m |
| Ambient temperature (non-freezing) | Amplifier: -10 ℃ to 50 ℃ Sensor: -25 ℃ to 50 ℃ Fiber: (Fiber tip: below 70 ℃) |
| Ambient humidity (non-condensing) | Amplifier: 35-85％RH Sensor: 35-85％RH Fiber: 95%RH or less (20%RH or less at 70 ℃ or higher) |
| Insulation resistance | Omitted (case grounded) |
| Dielectric withstanding | Omitted (case grounded) |
| Vibration | 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions |
| Shock | 500 m/s2 / 3 times each in 3 directions |
| Protective structure | Amplifier: IP20 Sensor: IP66 |
| Weight | Amplifier: Approx. 450 g (including socket) Sensor: Approx. 50 g (including cable) |
| Fiber allowable bending radius | 10mm (except for 15mm from the tip) |
| Fiber material (covering) | Glass (annealed stainless steel tube) |