| Transmitter type | CN-TL100 |
|---|---|
| Receiver type | CN-TR100MR |
| Detection method | Through beam |
| Detecting distance | 100m |
| Detecting object | Opaque dia.24mm or more |
| Power supply | 48 - 240 VAC ±10% 50/60Hz 24 - 240 VDC ±10% Ripple 10% or less Power consumption 0.5W or less(transmitter/receiver) |
| Current consumption | Transmitter: 0.5 W or less Receiver: 0.5 W or less |
| Output mode | Photo MOS relay output 1a Rating : 250VAC/DC 50mA or less resistive (load) |
| Operating mode | Dark On |
| Response time | 10ms or less |
| Light source | Infrared LED (wave length:860nm) |
| Indicator | Transmitter : Power indicator (green LED) Receiver : Power indicator(green LED), Operation indicator(orange LED), Received light intensity indicator (yellow LED x 3) |
| Material | Case: BS(Ni plated), Rear Panel : U polymer, Lens: Glass |
| Connection | Attached cable(outer diameter:dia.6mm, oil resistance cable, length 2m) Transmitter : 0.3 mm2 x 2 cores (gray) Receiver : 0.3 mm2 x 4 cores (black) |
| Weight | Approx. 300g (transmitter/receiver) |
| Accessories | Operation manual, wave washers, nuts (x2) |
| Ambient light | 5,000 lx or less (incandescent lamp) |
|---|---|
| Ambient temperature | -25 - +55 ℃ (non-freezing) storage: -40 - +70 ℃ (non-freezing) |
| Ambient humidity | 35 - 85%RH (non-condensing) |
| Protective structure | IP67 (IEC) |
| Vibration | 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions |
| Shock | 500 m/s2 / 3 times each in 3 directions |
| Dielectric withstanding | Between power supply / output and case: 2000 VAC for 1 minute Between power supply and output: 1500 VAC for 1 minute |
| Insulation resistance | 500 VDC, 20 MΩ or higher |