SWD55L SWD55R

Rating/Performance/Specification

Transmitter type SWD55L
Receiver type SWD55R
Detecting distance Between transmitter and receiver L=400-1000mm
Between transmitter and coil L1=200mm or more
Between receiver and coil L2=200mm or more
Light source Infrared LED
Effective detecting width 300mm
Ambient temperature -10 ℃ to 55 ℃ (Non-freezing/ non-condensing)
Insulation resistance 500 VDC, 20 MΩ or higher (between power supply and case)
500 VDC, 20 MΩ or higher (between output and case)
(receiver only)
Dielectric withstanding 500 VAC for 1 minute (between power supply and case)
500 VAC for 1 minute (between output and case) (receiver only)
Connection Metal connector (Calbe not provided)
Protective structure IP66
Weight Transmitter: Approx. 3kg, Receiver: Approx. 3kg
Power Supply Supplied by controller

Rating/Performance/Specification (Controller)

Controller model SWD55B
Output Relay output 1c and NPN open collector output
Operation mode Light ON
Output rating Relay output: 250 VAC 5 A or less (resistive load)
NPN open collector output: Sink current 75 mA
30VDC or less
Operation One-shot output, duration variable between 0.1 and 1 second
Response time 25ms or less
Power supply 100 - 110 VAC or 200 - 220 VAC
(Rated voltage: +10% - 15%, 50/60 Hz)
Power consumption 20W or less
Ambient temperature -10 ℃ to 55 ℃ (Non-freezing/ non-condensing)
Insulation resistance 500 VDC, 20 MΩ or higher (between power supply/output and case)
500 VDC, 20 MΩ or higher (between power supply and output)
Dielectric withstanding 1500 VAC for 1 minute (between power supply/output and case)
1500 VAC for 1 minute (between power supply and output)
Connection Terminal block
Weight Approx. 8.7kg
Protective structure IP40 (with case)