| Detection method | Through beam type |
|---|---|
| Detecting distance | 150 - 500m |
| Detecting object | Opaque object of dia. 6 mm or more |
| Number of beams | 20 |
| Detection width | 105 mm |
| Beam interval | 5.55 mm |
| Power supply | 12 - 24 VDC ±10 ％ 50/60Hz |
| Current consumption | Transmitter :80mA or less Receiver: 200mA or less(DC 12V), 100mA or less(DC 24V) |
| Output mode | Photo-MOS output (short-circuit protection available) Rating: 50mA(DC 30V) Residual voltage: 2V or less |
| Operation mode | ON/OFF output when light beams of all axes are received, ON/OFF when light beams of any axes are blocked (switchable) ON/OFF output when light beams of all axes are blocked, ON/OFF when light beams of any axes are received (switchable) |
| Response time | 15ms or less |
| Light source | Infrared LED(wave length:870mm） |
| Indicator | Transmitter: Power indicator (green LED) Receiver: Power indicator (green LED), Operation indicator (orange LED） |
| Switch | Light ON/Dark ON select switch, Operation of all axes/any axis select switch |
| Material | Case: Aluminum, Cap: PBT with glass fiber |
| Connection | Attached cable(outer diameter: dia. 4.1 mm) Transmitter:.0.3mm2× 2 cores, 2m (gray) Receiver: 0.2mm2× 4 cores, 2m (black) |
| Weight | Approx.110g(transmitter/receiver) |
| Accessories | Operation manual |
The detecting distance is the range which you can set for the sensor. The sensor can detect an object even in the immediate area of the sensor.
| Ambient light | 5,000 lux or less |
|---|---|
| Ambient temperature | -25 - +55 ℃ (non-freezing) storage: -20 - +70 ℃ (non-freezing) |
| Ambient humidity | 35-85%RH (non-condensing) |
| Protective structure | IP62 (IEC) |
| Vibration | 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction |
| Shock | 500 m/s2 / 3 times each in 3 directions |
| Dielectric withstanding | 500 VAC for 1 minute |
| Insulation resistance | 500 VDC 20 MΩ or higher |