FD-A320H

Rating/Performance/ Specification/ Environmental Specification

Output type Bestact relay output/Photo-MOS relay output
Control output ON-OFF output
Operation mode:
Light ON (output activated when light received)
Bestact relay output:
Rating:
220VAC 0.5A/110VDC 0.3A or less
(Inductive load)
Response time:
6ms or less
Photo-MOS relay output:
Rating:
250VAC/DC 0.1A or less
(Resistive load)
Response time:
4ms or less
Stability output Operation mode:
After seven consecutive runs with less margin for the threshold ligh intensity
Output mode:
Relay output: 1a 250VAC 5A (Resistive Load)
Photo-MOS Relay Output: 1a 250VAC/DC 0.1A or less (Resistance Load)
Current output 4m-20mA (Allowable resistive load: 0-500Ω) Response time 4ms F.S. or less
Valid lens diameter dia.28mm(OHA, OHAN, OHAN10)
Power Supply 100-240VAC +10%, -15% 50/60Hz
Power consumption 6W or less
Connection Cable with connector (VCF 0.75mm2 x 16 cores 2m, gray)
Ambient temperature Optical head, Fiber unit: -25 ℃ to 200 ℃
Amplifier: -25 ℃ to 50 ℃(Non-freezing)
Storage temperature -40 ℃ to 70 ℃(Non-condensing)
Ambient humidity 35 to 85%RH (Non-condensing)
Fiber optic unit allowable bending radius 50mm
Inslation resistance Between power supply and case: 500 VDC, 20 MΩ or higher
Between control/stability output and case: 500 VDC, 20 MΩ or higher
Between power supply and control/stability output: 500 VDC, 20 MΩ or higher
Between case and 4-20mA current output: 500 VDC, 20MΩ or higher
Between power supply and 4-20mA current output: 500 VDC, 20MΩ or higher
Between case and simulation input: 500 VDC, 20MΩ or higher
Between
Dielectric withstanding Between power supply and case: 1500 VDC for 1 minute
Between control/stability output and case: 1500 VDC for 1 minute (10mA)
Between power supply and control/stability output: 1500 VDC for 1 minute (10mA)
Between case and 4-20mA current output: 500 VDC for 1 minute (20mA)
Between power supply and 4-20mA current output: 500 VDC for 1 minute (20mA)
Between case and simulation input: 500 VDC for 1 minute
Vibration 10-55 Hz / 1.5 mm double amplitude / 2houtr each in 3 direction
Shock 500 m/s2 / 3 times each in 3 directions
Protective structure IP64
Weight Optical head:
Standard view type (OHA): Approx. 680g
Wide view type (OHW1/OHW2): Approx. 1300g
Narrow view type (OHAN) :Approx. 840g
Narrow view type (OHAN10):Approx. 860g
Airless hood:
F38A : Approx. 240g F38A-04: Approx. 550g
F38A-02: Approx. 330g F38A-05: Approx. 650g
F38A-03: Approx. 430g F38W : Approx. 600g
Air purge hood:
F38PC-02: Approx. 240g F38PC-05: Approx. 440g
F38PC-03: Approx. 300g

Amplifier Major Specification

Light receiving element Ge photodiode
Sensitivity wavelength 0.8~1.8μm
Detecting temperature range 2 ranges: Low temperature and high temperaure ranges (selectable with internal switch)
STB function Provided
Digital display Displaying light intensity (red LED) in three digits
Displaying operation threshold (green LED) in two digits
Indicator Displaying output(OP.L): Orange LED Displaying stability (STB): Green LED
Displaying simulation input (SIMU): Orange LED
Display of deetcting temperaure range High temperature range (Ht): Orange LED
Low temperature range (Lt): Orange LED
Received light intensity indication range 0.0-12.0(in increments of 0.1)
Setting range of operation threshold 1.0-9.0(in incrementes of 0.1)
Simulation input ON: Short (leak current: 5mA or less) OFF: Released