| Transmitter type | SWD55L |
|---|---|
| Receiver type | SWD55R |
| Detecting distance | Between transmitter and receiver L=400-1000mm Between transmitter and coil L1=200mm or more Between receiver and coil L2=200mm or more |
| Light source | Infrared LED |
| Effective detecting width | 300mm |
| Ambient temperature | -10 ℃ to 55 ℃ (Non-freezing/ non-condensing) |
| Insulation resistance | 500 VDC, 20 MΩ or higher (between power supply and case) 500 VDC, 20 MΩ or higher (between output and case) (receiver only) |
| Dielectric withstanding | 500 VAC for 1 minute (between power supply and case) 500 VAC for 1 minute (between output and case) (receiver only) |
| Connection | Metal connector (Calbe not provided) |
| Protective structure | IP66 |
| Weight | Transmitter: Approx. 3kg, Receiver: Approx. 3kg |
| Power Supply | Supplied by controller |
| Controller model | SWD55B |
|---|---|
| Output | Relay output 1c and NPN open collector output |
| Operation mode | Light ON |
| Output rating | Relay output: 250 VAC 5 A or less (resistive load) NPN open collector output: Sink current 75 mA 30VDC or less |
| Operation | One-shot output, duration variable between 0.1 and 1 second |
| Response time | 25ms or less |
| Power supply | 100 - 110 VAC or 200 - 220 VAC (Rated voltage: +10% - 15%, 50/60 Hz) |
| Power consumption | 20W or less |
| Ambient temperature | -10 ℃ to 55 ℃ (Non-freezing/ non-condensing) |
| Insulation resistance | 500 VDC, 20 MΩ or higher (between power supply/output and case) 500 VDC, 20 MΩ or higher (between power supply and output) |
| Dielectric withstanding | 1500 VAC for 1 minute (between power supply/output and case) 1500 VAC for 1 minute (between power supply and output) |
| Connection | Terminal block |
| Weight | Approx. 8.7kg |
| Protective structure | IP40 (with case) |