Type | Middle range / NPN model |
---|---|
Detection method | BGS (Background suppression) / FGS (Background recognition) |
Detecting distance | 10 to 200mm |
Setting distance | 150 to 200mm (*1) |
Set distance at factory | 200mm (*2) |
Power supply | 12 to 24VDC, class 2 / Ripple 10% or less |
Current consumption | 18mA or less |
Operation mode | Light ON / Dark ON selectable (by switch) |
Output mode | NPN open collector output / Load current 100mA (30VDC, class 2) or less / Residual voltage:1V or less PNP open collector output / Load current 100mA (30VDC, class 2) or less / Residual voltage:2V or less (*3) |
Light source (wavelength) | Four-element (AlGalnp) LED (660nm) |
Response time | 0.5ms or less |
Hysteresis | 5% or less |
Indicators | Operation indicator: orange LED / Stability indicator: green LED |
Adjustment volume | Distance setting volume (5-turn endless potentiometer) |
Selectors | BGS / FGS selector, Light ON / Dark ON selector |
Circuit protection | Output short circuit / Reverse connection / Surge protection |
Anti interference | Automatic mutual interference prevention function (*4) |
Material | Case : PBT, Lens : Polycarbonate |
Connection | M8 4 pin connector (Cable with connector is separately available.) |
Weight | 12g |
Accessory | Instruction manual, screw driver (Mounting bracket: seperately available) |
Note:The distance is adjusted to the "Set distance at factory" for each corresponding model by using a white paper, at which the sensor has optimum sensitivity.
*1 When using 50×50mm white paper for short range models and 100×100mm white paper for middle range models.
*2 The detection distance becomes longer than the specification when the distance setting volume is turned clockwise from the factory set position.
*3 Do not use the NPN and the PNP outputs simultaneously.
*4 Check the operation when two sensors are installed adjacently. The mutual interference prevention function may not work properly depending on conditions of installation or detecting objects.
Ambient light | 5,000 lx or less |
---|---|
Ambient temperature | -25 to +55℃ (Storage temperature : -40 to +70℃) (non-freezing/non-condensing) |
Ambient humidity | 35 to 85%RH (non-condensing) |
Protective structure | IP67 |
Vibration | 10 to 55Hz double amplitude / 1.5mm 2 hours each in 3 directions |
Shock | 500 m/s2 3 times each in 3 directions |
Dielectric withstanding | 1,000 VAC 1 minute |
Insulation resistance | 500 VDC megger, 20MΩ or more |