| Detection method | Diffuse reflective type |
|---|---|
| Shape | Head-on |
| Detecting distance | 3 to 50mm *1 |
| Standard detection object | 100mm×100mm white paper |
| Screw diameter | M6 × 0.75 |
| Operation power supply | 12 to 24VDC ±10% |
| Current consumption | No more than 20mA |
| Operation mode | Light ON |
| Output mode | PNP output Rating: source current: max 80mA (30VDC) |
| Response time | No more than 0.5ms |
| Light source | Infrared LED |
| Indicators | Operational indicator: Orange LED, Stability indicator: Green LED |
| Dial | Sensitivity adjustment dial *1 |
| Protective circuit | Reverse connection, output short-circuit and output reverse connection |
| Material | Case/Nut/Internal tooth lock washer: SUS303, Lens: Polysulfone |
| Connection method | Cord-attached type 2.8mm o.d. 2m in length 0.15mm2 × 3-core |
| Weight | Approx. 30g |
| Accesorries | Instruction Manual, nut, internal tooth lock washer, adjusting screwdriver |
*1 When using the sensitivity adjustment dial, use the accessory screwdriver provided. The torque must not exceed 0.8 N･cm.
| Ambient light | 3,000 lx or less |
|---|---|
| Ambient temperature | -25 to +55℃ -40 to +70℃ at storage (no freezing) |
| Ambient humidity | 35 to 85%RH (no dew condensation) |
| Protection | IP67 |
| Anti-vibration | 10 to 55Hz, double amplitude 1.5mm, X, Y, and Z directions, 2 hours each |
| Shock | 500m/s2, 3 times each in X, Y and Z directions |
| Dielectric withstand voltage | 500VAC for 1min |
| Insulation resistance | At least 20MΩ with 500VDC Megger |