B-1304MA/SA
Conversion board
Output Parallel Conversion Board for Each Optical Axis
Provided a dedicated circuit board that converts serial to parallel output by each optical axis(optional) *Make sure B-1304SA together when using with 65 or more optical axes
Dimension
Specifications
| Connection sensor | SS10A series |
|---|---|
| Channel number | B-1304MA：64CH B-1304SA：32CH |
| Maximum number of optical axes | 96 |
| Power supply | 24V DC ±10％, Ripple:10％ or less |
| Current consumption | 400mA or less for B-1304MA and B-1304SA in total （Sensor part and each optical axis output ＋ COM excluded） |
| Output operation mode | Dark-ON operation:operation indicator:OFF with light received in all axes, ON with light blocked in one more optical axes indicator of each optical axis output: OFF with light received, ON with light blocked Light-ON operation: operation indicator: OFF with light received in all axes,ON with light locked in one or more optical axes indicator of each optical axis output: ON with light received, OFF with light blocked |
| Output | FET open drain output Rating:30V DC 30mA,Residual voltage:2V or less |
| Response time | Up to 45ms including sensor *Data update cycle: Approx. 3ms |
| Sensor and power connection method | Terminal board (SMKDS1 Phoenix contact) |
| Connection method of each optical axis output | 40P connector（N365P040 Otax） |
| Connection method between main and sub boards | Attached cable with connector |
| Indicators | Power indicator(Green LED),Operation indicator(Orange LED), Operation indicator of each optical axis(Red LED) |
| Other functions | Output operation switches,Optical axis number selection switches |
| Ambient temperature | -10 to +55℃（no dew condensation） |
| Ambient humidity | 35 to 85％RH（no dew condensation） |
| Protective structure | None (board open structure) |